Step; Clock Type; Unit; Apo - Yaesu FTM-500DR Advance Manual

33 STEP

Set the frequency step when the tuning knob is turned, or when the key is pressed.
1. Press and hold the FUNC knob  [33 STEP]  Press the FUNC knob
Refer to the Operating Manual for details.

34 CLOCK TYPE

The CPU clock signal can be changed so that an internal spurious signal is not heard by
the receiver. Select "A" during normal operation.
1. Press and hold the FUNC knob  [34 CLOCK TYPE]  Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
A The clock shift operation will automatically switch ON and OFF.
B The clock shift will always be kept in operation.

35 UNIT

Set the units of measure to display the altitude, distance, and speed.
1. Press and hold the FUNC knob  [35 UNIT]  Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
INCH
METRIC
The default settings depend on the transceiver version.

36 APO

The transceiver can be set to automatically power OFF when there is no operation for a
period.
1. Press and hold the FUNC knob  [36 APO]  Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
OFF
0.5 hour to 12 hour Turns the power OFF when no operation is performed for a

37 GPS DATUM

Set the geodetic GPS positioning standard reference system.
1. Press and hold the FUNC knob  [37 GPS DATUM]  Press the FUNC knob
2. Rotate the FUNC knob to select the desired setting.
WGS-84
TOKYO MEAN
Select "WGS-84" for the normal operation.
Display units in the Imperial/USA system.
Display units in the Metric system.
Does not turn the power OFF automatically.
specified time.
Positions using the global geodetic reference system. This is
being used as a standard all around the world.
Positions using the Japanese geodetic reference system. When
positioning in Japan (Tokyo), the error can be made smaller.
54