Recording The Receive Audio; Replaying The Recorded Audio; Selecting The Track; Erasing The Recorded Audio - Yaesu FTM-500DR Advance Manual

Recording the receive audio

1. Press and hold the FUNC knob  [113 FVS REC]  Press the FUNC knob
The recording will be started.
2. Rotate the FUNC knob to select [116 FVS STOP], then press the FUNC knob.
The recording will stop.
3. Press the DIAL knob, SUB DIAL knob or PTT switch to finish the setting and return
to the original screen.

Replaying the recorded audio

1. Press and hold the FUNC knob  [115 FVS PLAY]  Press the FUNC knob
• Replay will be started.
• Replay will stop automatically at the end of the selected track.
2. Rotate the FUNC knob to select [116 FVS STOP], then press the FUNC knob.
The replay will stop.
3. Press the DIAL knob, SUB DIAL knob or PTT switch to finish the setting and return
to the original screen.

Selecting the track

1. Press and hold the FUNC knob  [114 TRACK SELECT]  Press the FUNC knob
2. Rotate the FUNC knob to select the track number to be replayed.
"ALL", "1", "2"... , "8"
• When "ALL" is selected, all the recorded tracks will be replayed in sequence.
3. Press the FUNC knob.

Erasing the recorded audio

1. Press and hold the FUNC knob  [117 FVS CLEAR]  Press the FUNC knob
The confirmation screen will be displayed.
2. Rotate the FUNC knob to select [OK], then press the FUNC knob.
A beep will sound, and erasing will be started.
All recorded audio will be erased. When there are two or more recordings, individual
tracks cannot be erased.
3. Press the DIAL knob, SUB DIAL knob or PTT switch to finish the setting and return
to the original screen.
27