NEC NVM-CA Series Integration Manual page 74

Mitel SX-50 (Inband)
Phone System Programming (cont'd)
X
70
Command 750 ARS ROUTE LIST TABLE PROGRAMMING
Bits a,b, c: Route List Number (001
Enter the desired route list number (001
Bits d, e, f: 1st Choice Route Number
Enter the number of your first choice.
Bits g, h, i: 2nd Choice Route Number
Enter the number of your second choice.
Bits j, k, l: 3rd Choice Route Number
Enter the number of your third choice.
Bits m, n, o: 4th Choice Route Number
Enter the number of your fourth choice.
Command 751 ARS ROUTE TABLE PROGRAMMING
Bits a, b, c: Route Number 001
Enter the desired route number (001
Bits d: Trunk Group Number (1
Enter the number of the trunk group assigned to the Voice Mail.
Bits e, f, g: Digit Modification Entry Number
Enter the number of the entry on the Digit Modification Table that corresponds to this route.
(See Command 752.)
Command 752 ARS DIGIT MODIFICATION TABLE
PROGRAMMING
Use this table to store the commands that the Voice Mail requires. (This table is used with
Abbreviated Dialing.)
Bits a, b, c: Digit Modification Number 001
Enter the number of the entry on the Digit Modification Table.
Bits d, e: Number of Digits to be Deleted 00
Enter the number of digits that should be deleted from the dialed digit string (which comes
from the ARS Digit Comparison Table).
Integration Notes
¬
200)
¬
200).
¬
100
¬
100) in order of preference.
¬
6)
¬
100
¬
26
Issue 1-0