NEC NVM-CA Series Integration Manual page 259

Voice Mail Programming
Default Dial Action Table
Other Notes
Issue 1-0
Extension numbering is 200 to 249.
The extension numbers for a UX or a UC— a specific extension or XX—must be placed
in brackets followed by a "1" in order to force ringing at extensions that are set for Auto-
matic Voice Announce.
Key
Key 0
Key 1
Key 2
Key 3
Key 4
Key 5
Key 6
Key 7
Key 8
Key 9
Key *
Key #
TIMEOUT
By default, the Automated Attendant is set up with unscreened transfers (UTRFs), so that you must
Call Forward the phones to the Voice Mail.
The Voice Mail software uses Trunk Mailboxes for processing inbound call information, but you
cannot program any features for them. In general, the numbering for Trunk Mailboxes starts at 01.
It is recommended that you do not change this numbering, unless the trunks in your phone system
start with a different number. If the starting number for your trunks and for your Subscriber Mail-
boxes is the same, set the First Trunk equipment # /Trunk mailbox offset parameter.
Integration Notes
Toshiba Strata DK24/56/96
Routing Option
Action: UX for Dialing Options Menus 1 & 4
MR (REC1) for Dialing Options Menus 2 & 3
Number: [200]1 for DATs 1 & 4
200 for DATs 2 & 3
Action: UK
Number: None
Action: UC
Number: [XXX]1
Action: UK
Number: None
Action: UK
Number: None
Action: UK
Number: None
Action: UK
Number: None
Action: UK
Number: None
Action: UK
Number: None
Action: HU
Number: None
Action: Quick Message (REC1)
Number: IXXX
Action: LOGON
Number: None
Action: UX for Dialing Options Menus 1 & 4
MR (REC2) for Dialing Options Menus 2 & 3
Number: [200]1 for DATs 1 & 4
200 for DATs 2 & 3
:
255