NEC NVM-CA Series Integration Manual page 153

NEC Electra Pro II
Integration Notes
Required Hardware and Software
3
3
Voice Mail Availability
Phone System Programming
LK1 System Mode Programming
LK4 Telephone Mode Programming
Issue 1-0
Each Voice Mail port must be connected to a port on the SLI-F (8G)-21KTU Card.
Any software level is OK.
This phone system is available on the NVM-2000CA with Software Version 8.01 or higher.
LK 1 - 11 System Transfer/Camp-On Selection
Select Yes (the default setting).
LK 3 - 02 SLT Hookflash Signal Selection
Select Hold (the default setting).
LK 3 - 07 Voice Mail Digit Add Assignment
Enter ***3 for the forwarding string.
LK 3 - 08 Voice Mail DTMF Delay Timer
Select 1 sec.
LK 3 - 10 Voice Mail DTMF Duration/Interdigit Time Selection
Select 100/70 ms.
Data No. 01 - CO/PBX Ring Assignment (Day Mode)
For each Voice Mail port, select all the trunk numbers that should ring that port during the Day
Mode.
Data No. 02 - CO/PBX Ring Assignment (Night Mode)
For each Voice Mail port, select all the trunk numbers that should ring that port during the
Night Mode.
Data No. 10 - Station Number Assignment
Use this program to change the port-to-station assignments, if necessary.
Data No. 14 - Intercom Master Hunt Number Selection
Select a master hunt number.
Integration Notes
NEC Electra Pro II
X
149