Morgan - NEC NVM-CA Series Integration Manual

MORGAN

Integration Notes The information below applies to the MORGAN phone system.
Hardware and Software Requirements
3
3
3
3
Voice Mail Availability
This phone system is available on the NVM-2000CAwith software version 8.01 or higher.
Phone System Programming
Hunt Groups
Station Information
Make the following entries for each station that will use VX:
OPX Circuits
Issue 1-0
Software Version 2.66 or higher
OPX/DID Card (P/N 98011)
DTMF Receiver Card (P/N 98085)
External Ring Generator
Name
Use this option to enter a 10-character name that will identify the hunt group. The name will
appear on reports.
Member List
Use this option to enter the VX OPX ports into the hunt group member list. Refer to Station
Information below.
Voice Mail System
Use this option to enter the number of the Voice Messaging sub-system. You normally enter 1,
unless you have more than one VX installed.
Key Designations, Type
Use this option to enter VMSG in this field to program a Voice Messaging Key.
Extension Number
Use this option to enter the VX OPX station number (201
unused on-premise station. This is a software assignment only. It does not require a port on an
installed Station PCB.
Port Number
Use this option to enter the VX port number (1
installed OPX/DID PCB.
Owner's Name
Use this option to enter a name (up to 10 characters) for the VX OPX station. The name will
appear on telephone displays and system reports.
Station Type
Use this option to enter the VMX.
Integration Notes
MORGAN
– ).
343 The number must be an
– ).
48 The OPX port must be a port on an
X
101