NEC NVM-CA Series Integration Manual page 51

Phone System Programming (cont'd)
Voice Mail Programming
Default Dial Action Table
Note:
When the phone system is integrated with a NVM-2000CA (with a software level of 8.01 up to 9.10), NVM-22CA, or
NVM202exCA, the default values for the Key 3 Action and Number are UND and N, instead of the values listed in
the Dial Action Table above.
Issue 1-0
User Features
To transfer an intercom or CO call directly into a mailbox:
Press Feature 14, enter the 2-digit mailbox number, and hang up.
To allow the Subscribers to call their mailboxes with one touch:
Program each extension with an auto dial button for the Voice Mail hunt group (Intercom 777).
To retrieve a call that is ringing at another extension:
Go off hook, press Intercom, dial 6 and the number of the ringing extension.
To program a VMS Cover Button to extension:
Press Feature 15.
Key
Key 0
Key 1
Key 2
Key 3
(See Note below)
Key 4
Key 5
Key 6
Key 7
Key 8
Key 9
Key *
Key #
TIMEOUT
Integration Notes
Routing Option
Action: UTRF
Number: 0
Action: TRF
Number: XX
Action: UND
Number: N
Action: TRF
Number: XX
Action: UND
Number: N
Action: UND
Number: N
Action: UND
Number: N
Action: UND
Number: N
Action: UND
Number: N
Action: HUP
Number: N
Action: REC1
Number: IV
Action: LOGON
Number: N
Action: UTRF
Number: 0
Lucent ACS
:
47