NEC NVM-CA Series Integration Manual page 167

Samsung ProStar 56/120
Integration Notes
Required Hardware and Software
3
3
3
Voice Mail Availability
This phone system is available on the NVM-2000CA with Software Version 8.01 or higher.
Phone System Programming
Issue 1-0
Each Voice Mail port must be connected to a port on the MSLC2
card: V04. Use circuits 5, 6, 7, and 8. To connect more Voice Mail ports to the ProStar, you
must install an additional MSLC2 Card.
ProStar 56ex/120mx KSU: All 93.05.06
One CPU: V0091.04.27
Program 33 - Stn Hunt to VM
Program the Voice Mail extensions into a Hunt Group.
Program 60 - Trk Ring to VM
Use to make trunks, ring the Voice Mail Hunt Group when the trunks should be answered by
the Voice Mail.
Program 45 - Enable VM Ports
Use to enable Voice Mail extension ports.
Program 94 - Integration Protocol
DTMF Ext. Numbers - Used
DTMF Call Type - Used
Direct Call: #
Recall: B
Forward All - A
Forward Busy - A
Forward N/A - B
DTMF CO Numbers - Used
CO Call ID - D
DN2 Information - Used
Progress Tones - Normal
Disconnect Signal DTMF - Used
Disconnect Signal DTMF Digit - 9
Separator Digit - Used
Separator Digit DTMF Digit: #
Integration Notes
Samsung ProStar 56/120
X
163