Table of Contents
Advertisement
Panasonic DBS
Phone System Programming (cont'd)
Miscellaneous programming (cont'd):
Voice Mail Programming
System Options
X
134
Program a Message Waiting Key at a Multibutton extension
(cont'd):
1. Press REDIAL key twice.
2. Press #.
3. Dial Multibutton's mailbox number (by default, it's the same as the extension number).
4. Press ON/OFF.
5. Label the Message Waiting Key for the user.
Use the "Extension Identification" procedure below at each Multi-
button.
This procedure is required only if the Automated Attendant is not set up for screened transfers
and extension users are forwarding their calls into their mailboxes. This procedure ensures
that messages get left in the correct mailbox.
1. Press ON/OFF.
2. Press PROGRAM key.
3. Press AUTO.
*
4. Dial
.
5. Dial Multibutton's extension number.
*
6. Dial
.
7. Dial Multibutton's extension number.
8. Press HOLD.
9. Press ON/OFF.
RNA/Busy, Hold Retrieval
DEFAULT
:
FP
Lamp On String
:
*4X
DEFAULT
Lamp Off String
DEFAULT
:
*5X
Transfer String
:
FW
DEFAULT
Integration Notes
Issue 1-0
Advertisement
Table of Contents
