NEC NVM-CA Series Integration Manual page 241

Lucent Par tn er Plus
Integration Notes
Required Hardware and Software
Voice Mail Availability
Phone System Programming
Issue 1-0
3
Processor must be R 3.1 module for inband signaling.
3
Station/Line 206 Module (206E R3.1) is required for Message Waiting capability for voice
messages.
This phone system is available on the NVM-2CA Voice Mail system.
You will need the Partner Plus manual to complete this programming.
To have the Automated Attendant answer calls:
Program 607 AA Extensions
Use this program to identify each Lucent Partner extension that will have a Key *AA/VM port
connected. This is to notify display set users of a call being handled by the Voice Mail System
ports.
Program 505 Hunt Group Extensions
Use this program to assign the Lucent Partner extensions that will be connected to AA/VM
ports to Hunt Group 7. Only this hunt group sends integration protocol.
Program 206 Group Call Distribution
Use this program to assign the lines that should terminate and be answered by Hunt Group 7
above.
Program 507 VMS Hunt Schedule
Use this program to determine when calls will terminate to Hunt Group 7 (always, day only,
night only). This depends on the status of the Night Service Button at Extension 10.
Program 506 VMS Hunt Delay
Use this program to determine how outside calls should be answered by the AA/VM:
Immediate (after 2nd ring) or Delayed (after 4th ring).
To set up unscreened Automated Attendant transfers (UTRFs) to the
extensions:
Program 310 Auto VMS Cover
Use this program to determine whether an extension's unanswered intercom and transferred
calls are automatically covered by the voice messaging system. If Do Not Disturb is activated,
calls will go to voice messaging regardless of whether or not Program 310 is enabled.
Program 306 Transfer Return Extension
Use this program to determine the destination of a call after an incomplete Auto Attendant
transfer. The destination is typically Extension 10. In an incomplete transfer, the Automated
Attendant cannot complete the call transfer, because the call was moved to an extension that
either did not answer or did not have Voice Mail coverage.
Integration Notes
Lucent Partner Plus
X
237