NEC NVM-CA Series Integration Manual page 148

NEC Electra Pro I
Phone System Programming (cont'd)
LK1 System Mode Programming (cont'd)
LK4 Telephone Mode Programming
LK4 System Mode Programming
X
144
Data No. 68 - Voice Mail DTMF Delay Timer
Select 500 ms (.5 sec).
Data No. 69 - Voice Mail DTMF Duration/Interdigit Time Selection
Select 100/70 ms.
Data No. 25 - Ring Transfer Selection
Select Yes (the default setting).
Data No. 34 - SLT Hookflash Signal Selection
Select Hold (the default setting).
Data No. 35 - Station Master Hunt Number Selection
Select the first number of the 10's group that contains the Voice Mail extension numbers. For
example, if the Voice Mail extensions are numbered from 20 through 29, select 20 as the Sta-
tion Master Hunt Number. The Station Master Hunt Number (Pilot Number) lets an extension
user easily access a Voice Mail extension by dialing the Station Master Hunt Number from an
extension. The Electra will automatically "hunt" through all the Voice Mail extensions and
give the caller the lowest-numbered available one.
Data No. 64 - SLT Transfer Selection
Select Hangup.
Data No. 01 - SLT Connected Yes/No Selection
Select Yes for each Voice Mail port.
Data No. 03 - Internal Zone Paging Selection
Select None for each Voice Mail port.
Data No. 05 - DTMF/DP SLT TYPE SELECTION
Select MF for each Voice Mail port.
Data No. 06 - Station Number Assignment
Use this program to change the port-to-extension (station) assignments, if necessary.
Data No. 07 - Voice Mail/SLT Selection
Select Yes for each Voice Mail port.
Data No. 14 - Voice Call Block Selection
Select Yes for each Voice Mail port.
Integration Notes Issue 1-0