NEC NVM-CA Series Integration Manual page 254

Toshiba Strata DK8/16
Phone System Programming (cont'd)
Note: LEDs 01, 02 & 04 must be on for all non-VM stations in order for Msg. Waiting to function.
:
250
Program 35 - Station Class of Service
•
Busy Station Transfer (BST), LED 20 - Enable for VM ports
•
Busy Station Ringing (BSR), LED 19 - Enable for all non-VM stations
•
Msg. Waiting Receive (RCV), LED 04 - Enable for all non-VM stations
Program 40 - Station CO line Access
If callouts, Message Notification, etc. are required, use this program so that Voice Mail ports
will be able to access CO lines.
Program 81 - 89 - CO Line Ringing Assignments
Use this program to assign CO ringing for day/night operation. If Auto Attendant is required,
make CO ring assignment only for the lowest-numbered VM port in the hunt group.
Other Programming Notes
•
Do not change the default Message Waiting Set and Cancel codes: MW Set Code = 63.
MW Cancel Code = 64.
•
Each station must be programmed individually for VM ID codes.
•
Each station must be programmed individually for VM ID codes:
INT#656 (Call forwarding Protocol) = 01XX, where XX is the station number
INT#657 (Direct Logon Protocol when MW lamp is lit) = 00XX, where XX is the station
number
Integration Notes Issue 1-0