Tektronix VITS 200 Instruction Manual page 37

Operating Basics
Menu
2–4
ENABLE
The ENABLE button is used to enable and disable the VBI Message, Standby
Message, and Standby modes. Pushing this button while in these menus will
toggle the state of the mode.
SAVE/RECALL
This button saves the user selections to nonvolatile memory. When pressed, the
display will show the word SAVED while writing to memory. It is always
necessary to save VITS selections for them to be inserted. Vertical messages and
standby messages are saved automatically; they do not require use of the
SAVE/RECALL button. This button is also used when recalling previously
saved presets.
The menu buttons are the center group of six push buttons. These are used to
call the menus used in making the VITS assignments, VBI message selections,
Standby mode signal selections, standby message, full-field test signal selec-
tions, and to access the utilities routines. Fig. 2–2 gives a summary of front-pa-
nel operation.
VITS STANDBY
VBI STANDBY
MESSAGE MESSAGE
TEST SIGNAL
UTILITIES
VITS 200