Charging The Battery - LEAB CHAMP 12 V User Manual

LEAB Automotive GmbH

9.2 Charging the battery

To unpack the device, proceed as follows:
ü The device is installed.
ü The battery is connected.
1. Connect the mains plug to a 230 V mains supply.
ð Charging starts automatically, the yellow LED of the charge status indicator
lights up.
ð If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.
ð When the battery is fully charged, the green LED on the charging status indic-
ator lights up and indicates the trickle charge.
ð The battery is charged.
9.3 Charging the battery
To unpack the device, proceed as follows:
ü The device is installed.
ü The battery is connected.
1. Connect the mains plug to a 115 V mains supply.
ð Charging starts automatically, the yellow LED of the charge status indicator
lights up.
ð If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.
ð When the battery is fully charged, the green LED on the charging status indic-
ator lights up and indicates the trickle charge.
ð The battery is charged.
LEAB Automotive GmbH Thorshammer 6
9 Operation
24866 Busdorf 45