Basic Adjustment; Overview - Canon Inner Finisher-L1 Service Manual

Basic Adjustment

Overview

In the case adjusting the processing tray area, adjust the paper alignment at first, and adjust the staple position.
In the case adjusting the paper alignment, adjust transport direction at first, and adjust front-rear direction.
No Items
Adjusting the Alignment Posi-
1
tion at Staple Mode
Adjusting the Alignment Posi-
2
tion at Non-staple Mode
Adjusting the Adjusting the Return Belt
3
Alignment Pressure
Adjusting Center Alignment
4
Standard Position
Right Angle Adjustment of
5
Alignment Plate
6 Adjusting the Staple Position
Adjusting the Adjusting the Stapler Unit In-
7
Staple Position stallation Position
Adjusting the Staple-Free
8
Binding Position
Use case
When the paper alignment position is displaced in the
staple mode or staple-free staple mode.
When the paper stacking position is displaced in the non-
sort mode or shift-sort mode.
When misalignment occurs in feed direction.
• When the standard position for the center alignment
is misaligned.
• When misalignment occurs in front/ rear direction.
• When remove or replace the Alignment Plate.
• When the paper alignment position is displaced.
When the staple position in front/rear direction is dis-
placed in the front/rear 1-stapling mode or 2-stapling
mode.
• When the stapler unit is replaced.
• When the staple position in feed direction is dis-
placed in the front/rear 1-stapling mode or 2-sta-
pling mode.
When the staple-free binding position in the staple-free
binding mode.
100
5. Adjustment
Refer to
"Adjusting the Alignment
Position at Staple Mode"
on page 101
"Adjusting the Alignment
Position at Non-staple
Mode" on page 102
"Adjusting the Return
Belt Pressure" on page
102
"Adjusting Center Align-
ment Standard Position"
on page 103
"Right Angle Adjustment
of Alignment Plate " on
page 104
"Adjusting the Staple
Position " on page 108
"Adjusting the Stapler
Unit Installation Posi-
tion " on page 109
"Adjusting the Staple-
Free Binding Position "
on page 111