Removing This Machine From The Host Machine. (In The Case Of Inner Finisher And Inner Puncher Unit) - Canon Inner Finisher-L1 Service Manual

5. If the staple unit is not at the staple cartridge replacement position, perform the following procedure.
The stapler unit's roller may be riding on the base plate. so, slightly lift the stapler unit [1],and rotate the roller toward you to
correct the position.
6. Close the finisher front cover.Open the finisher front cover again, and check that the staple unit is at the staple
cartridge replacement position.
7. Close the finisher front cover.
Removing this Machine from the Host Machine. (In the case of Inner
Finisher and Inner Puncher Unit)
■ Removing this Machine from the Host Machine. (iR-ADV DX C5800 Series, iR-
ADV DX 6800 Series)
● Procedure
CAUTION:
Check that the main power switch is OFF and the power plug is disconnected from the outlet.
1. Open the Finisher Front Cover [1].
[1]
[1]
55
4. Parts Replacement and Cleaning
[1]