Making Initial Checks; List Of Initial Check Items - Canon Inner Finisher-L1 Service Manual

Making Initial Checks

List of Initial Check Items

Item No.
Installation Environ- 1 The value of power voltage is +/- 10% of the specified voltage.
ment
2 The machine is installed away from heat and moisture (near a faucet, water heater, or humidifier),
cold place, source of fire or in an area exposed to dust.
3 The machine is not in a place that generates ammonia gas.
4 The machine is not in a place of direct sunlight.
5 The machine is installed in a well-ventilated place where the machine stands horizontally.
Checking the paper 6 Paper does not absorb moisture or dry out. Set paper by taking it out from a new package to
output.
Checking the con- 7 Check the list of estimated life of consumable parts and replace parts that have reached the
sumable parts estimated life.
Checking the peri- 8 Replace parts that have reached the estimated life in accordance with the list of periodical serv-
odically replaced ices and the table of periodically replaced parts.
parts
Check Items
116
6. Troubleshooting
Check