Canon Inner Finisher-L1 Service Manual page 89

2. Remove the Cable Guide [1].
• 1 Screw [2]
• 3 Connectors [3]
• 2 Cables [4]
1x
3x
1x
[4]
[1]
[2]
3. Remove the Tray Shift Motor Unit [1].
• 3 Screws [2]
3x
[2]
4. Remove the E-ring [1] and the Gear [2] and the Pin
[3].
[3]
[1]
4. Parts Replacement and Cleaning
5. Remove the E-ring [1], and move the Gear [2], after
that remove the pin [3] and the Bushing [4] and the
Tray Drive Shaft [5].
[5]
6. Remove the E-ring [1] and the Pulley [2] and the Pin
[3] and the Bushing [4].
7. Move the Bushing [1], and remove the Paper Fold
Unit [2].
82
[3]
[2]
[1]
[4]
[2]
[3]
[1]
[4]
[3]
[2]
[1]