Canon Inner Finisher-L1 Service Manual page 32

■ Alignment Operation in Shift-sort Mode
1. After the delivery sensor (PS1) detects the trailing edge of the paper, the front and rear alignment plates move to the wait
positions.
• Wait positions during front shift (front alignment plate position: paper width +20 mm, rear alignment plate position: paper
width +5 mm)
• Wait positions during rear shift (front alignment plate position: paper width +5 mm, rear alignment plate position: paper
width +10 mm)
End of Paper
+5 mm
Middle of Feeding Path
End of Paper
+20 mm
End of Paper
+10 mm
Middle of Feeding Path
End of Paper
+5 mm
Rear Alignment Plate
Front Alignment Plate
Rear Alignment Plate
Front Alignment Plate
25
2. Technical Explanation