Canon Inner Finisher-L1 Service Manual page 113

2. Loosen the 2 fixing screws of the alignment plate (front and rear), adjust the alignment plate as follows, and then
tighten the 2 screws.
• Front alignment plate: Fit the leading edge to the paper. The trailing edge make space of 1mm or less.
• Rear alignment plate: Align it with the paper in parallel.
3. Widen the rear alignment palte approx. 10mm.
2x 2x
Paper
Front Alignment Plate
106
Fixing Screw
Rear Alignment Plate
1.0 mm or less
Fixing Screw
5. Adjustment