Overview; Adjustment And Functional Setting In Service Mode - Canon Inner Finisher-L1 Service Manual

Overview

Adjustment and Functional Setting in Service Mode

■ Adjustment
For details, see the service manual for the host machine.
Items
Adjustment of 2-stapling position
Adjustment of front 1-stapling po-
sition
Adjustment of rear 1-stapling posi-
tion
Adjust staple free pressure
Adjustment of staple position for
paper feed direction in the staple
free stapling mode
Adjustment of staple position for
front/rear direction in the staple
free stapling mode
Adjustment of return belt pressure
Adjustment of manual stapling po-
sition
Enter the adjustment value of the
position of the Alignment Plate at
factory shipment.
Adjustment of alignment position
at staple mode
Adjustment of alignment position
at non-staple mode
Adjustment of center alignment
standard position
Adjustment of amount of punch
switch back (thin paper)
Adjustment of amount of punch
switch back (Plain paper 1/2/3,
Heavy paper 1/2)
Adjustment of amount of punch
switch back (Heavy paper 3/4)
Adjustment of amount of punch
switch back (Heavy paper 5/6)
Adjustment of amount of punch
switch back (Heavy paper 7)
Adjusting the punch hole position
in feed direction
Adjusting the punch hole position
in the horizontal registration direc-
tion
■ Function Settings
For details, see the service manual for the host machine.
Service Mode
(SORTER> AD-
JUST)
STP-2P When the staples position in front/rear direction
is displaced in the 2-stapling mode
INSTP-F1 When the staple position in front/rear direction is
displaced in the front 1-stapling mode
INSTP-R1 When the staple position in front/ rear direction is
displaced in the rear 1-stapling mode
FR-ST-PS Upon user's request
FR-STP-X
When the staple position in paper feed direction
is displaced in the staple free stapling mode
FR-STP-Y
When the staple position in front/rear direction is
displaced in the staple free stapling mode
RBLT-PRS When the paper alignment position is displaced
MSTP-2P When the staple position in front/rear direction is
displaced in the manual stapling mode
INF-ALG1
• When replacing the Finisher Controller PCB
• When clearing RAM data
INF-ALG3 When the paper alignment position is displaced
at staple mode
INF-ALG4 When the paper alignment position is displaced
at non-staple mode
CENT-ALG • When the standard position for the center
alignment is misaligned
• When the paper alignment position is dis-
placed
PNC-SBTN
PUNCH-SB
• When the punch hole position is off to the
feed direction
PNCH-SB1
• When damage occurs to the paper trailing
edge
PNCH-SB2
PNCH-SB3
PNCH-X When the punch hole is displaced in feed direc-
tion
PNCH-Y
When the punch hole is misaligned in the hori-
zontal registration direction
Use case
97
5. Adjustment
Remarks
This mode is available when
the puncher unit has been in-
stalled