Export From Robot Tab - Universal Robots Log Viewer e Series Original Instructions Manual

Table of Contents

Shortcuts:

CTRL+A: Select all check boxes

CTRL+N: Select the default check boxes

Record data Tab

2.5.6 Export from robot Tab

The Export from Robot tab allows you to create and export the Support File from your connected robot

via ethernet connection to the computer. Refer to 2.5.5 Record Data tab topic in this manual, to

understand how to connect the robot's and computer IP addresses.

For older robot software versions (PolyScope 5.7 and 3.12 below) the Log History and Flight Reports

are retrieved instead of the Support File.

After the download the user will be asked, if he/she wants to open the pulled data directly on UR Log

Viewer or just store in the computer.

Log Analyzer Manual (EN) V1.1

Table of Contents

Do you have a question about the Log Viewer e Series and is the answer not in the manual?