Wireless Considerations - Emerson Rosemount 928 Reference Manual

Installation
February 2023
3.3

Wireless considerations

3.3.1 Power up sequence
Only install the transmitter and all other wireless devices after you have installed the
wireless gateway and the gateway is functioning properly. Install the Emerson 701
SmartPower
devices in order of proximity from the gateway, beginning with the closest. This results in a
simpler and faster network installation. Enable active advertising on the gateway to ensure
that new devices join the network faster. Refer to the reference manual for your wireless
gateway for more information.
3.3.2 Antenna position
Position the antenna vertically straight up and, if the application requirements allow,
approximately three feet (one meter) from any large structure, building, or conductive
surface to allow for clear communication with other devices.
Figure 3-1: Antenna Position
102
Module - Black into the transmitter to power the device. Power up wireless
™
Reference Manual
00809-0100-4928
Emerson.com/Rosemount