Emerson Rosemount 928 Reference Manual page 36

Configuration
February 2023
2. On the Device Display Options screen, select one of the following display mode
3. Select OK to save the selected device display options.
Note
When a handheld communication device is connected to the transmitter, the LCD display is
in High Availability mode. Selecting and accepting the On Demand or Periodic options does
not take effect until approximately five minutes after the handheld communicator device is
disconnected. Selecting and displaying Disabled takes effect immediately.
36
options:
• Disabled: The display is turned off. This is useful if the display will never be
viewed locally.
• On Demand: The display is on when the gas monitor is connected to a handheld
communication device or when it receives a signal from its wireless gateway.
• Periodic: The display is on only during updates at the configured update rate.
• High Availability: The display is always on regardless of the configured update
rate. This is the default display mode option.
Reference Manual
00809-0100-4928
Emerson.com/Rosemount