Table of Contents
Advertisement
Object
WAN IP, whether obtained automatically or specified manually, should NOT be on
the same IP net segment as the LAN IP; otherwise, the router will not work properly.
In case of emergency, press the hardware-based "Reset" button.
4.5.2 WAN Advanced
This page is used to configure the advanced parameters for Internet area network which connects to
the WAN port of your router as shown in
Balance Weight, Detect Interval, Detect Link Up Threshold, etc...
Enterprise 5-Port 10/100/1000T VPN Security Router
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your
ISP.
Select DHCP Client to obtain IP Address information
DHCP
automatically from your ISP.
Figure
4-29. Here you may change the setting for Load
Figure 4-29: LAN Setup
- 80 -
Description
VR-300 series
Advertisement
Table of Contents
