Advanced; Routing - Planet ADE-3400 User Manual

3.5 Advanced

In the navigation bar, click Advanced. In the Advanced page that is displayed contains Route, NAT, QoS, TR-069
and Others.

3.5.1 Routing

Choose Advance > Routing, and this page contains Static Route and RIP.
3.5.1.1 Static Route
Click Static Route in the left pane, and the page shown in the following figure appears. This page is used to configure
the routing information. You can add or delete IP routes.
The following table describes the parameters and buttons of this page:
Field
Enable
Destination
Subnet Mask
Next Hop
Metric
Interface
Add Route
Update
Delete Selected
Show Routes
Static Route Table
Select it to use static IP routes.
Enter the IP address of the destination device.
Enter the subnet mask of the destination device.
Enter the IP address of the next hop in the IP route to the destination device.
The metric cost for the destination.
The interface for the specified route.
Click it to add the new static route to the Static Route Table.
Select a row in the Static Route Table and modify the parameters. Then click it to
save the settings temporarily.
Select a row in the Static Route Table and click it to delete the row.
Click it, the IP Route Table appears. You can view a list of destination routes
commonly accessed by your network.
A list of the previously configured static IP routes.
Description
31
ADSL2/2+ Router
ADE-3400