Installing Components On Your Computer; About Installing Components On Your Computer; Windows Xp - Epson EpsonNet 10/100 Base Tx Int. 5e Manual

Table of Contents

Advertisement

Installing Components on Your Computer

About installing components on your computer

Before configuring the network interface and printing from the
computer, you need to install the necessary components (such as
TCP/IP, NetBEUI, etc.) and assign an IP address and subnet mask
for your computer, depending on the printing method you want
to use. See the section appropriate for your operating system.
"Windows XP" on page 27
"Windows Me/98/95" on page 30
"Windows 2000" on page 33
"Windows Server 2003" on page 36
"Windows NT 4.0" on page 39
"Macintosh" on page 42

Windows XP

For Windows XP, use the following procedure to install the
necessary components.
Note:
❏ The Windows XP CD-ROM may be required during the
installation.
❏ When using TCP/IP or IPP for printing, you need to set the IP
address, the subnet mask, and the default gateway of the computer.
Chapter 1 Installing Components and Setting Up the Network Interface
C h a p t e r 1
27

Advertisement

Table of Contents
loading

Table of Contents