Table of Contents
Advertisement
Using the NDPS Gateway
This section contains instructions on printing using Novell
Distributed Print Services
®
NetWare
the new generation print services of NetWare.
Note:
❏ Banners cannot be printed with NDPS.
❏ The Status Monitor 3 utility cannot be used with NDPS.
❏ Bind the IP or both IP or IPX protocols on the NetWare server that
runs NDPSM.NLM and EPSONGW.NLM.
Check the following points before starting.
❏ Install the appropriate client software, such as Novell Client
3.3 or later for Windows 95/98, Novell Client 4.8 or later for
Windows 2000/NT 4.0, or Novell Client 4.9 or later for
Windows XP on client workstations. Make sure they install
NDPS.
❏ When you use the network interface with Bindery (either in
the Print Server mode or the Remote Printer mode), you need
PCONSOLE.EXE to create bindery objects such as Print
Server and Print Queue objects. Since PCONSOLE.EXE does
not come with NetWare 5.x/6.0, you need to get the file from
Novell.
Outline of settings
The followings are basic steps to use the network interface with
the NDPS printing system. Detailed procedures are described in
the subsequent sections.
1. Select the Connection Type and make the printer
environment on the Server and Clients.
5.x/6.0. Novell Distributed Print Services (NDPS) is
®
®
(NDPS
) with Novell
Chapter 3 Tips for Administrator
®
177
Advertisement
Table of Contents
