Table of Contents
Advertisement
For Windows XP/2000/Server 2003/NT 4.0 Users
Follow the steps below to add a port using the Add Printer
Wizard.
❏ If you want to add a port for a device with its IP address
assigned automatically by the DHCP server or router, see
"Adding a port for a device assigned with a dynamic IP
address" on page 122.
❏ If you want to add a port for a device with its IP address
assigned manually, see "Adding a port for a device assigned
with a static IP address" on page 127.
Note:
❏ Be sure that the computer is connected to the network and TCP/IP
is correctly set.
❏ A valid IP address must be assigned to the network interface.
Adding a port for a device assigned with a dynamic IP
address
1. For Windows XP: Click Start and then Printers and Faxes.
Under Printer Tasks, click Add a printer to start the Add
Printer Wizard.
For Windows 2000: Click Start, point to Settings, and then
select Printers. Double-click Add Printer in the Printers folder
to start the Add Printer Wizard.
For Windows Server 2003: Click Start and then Printers and
Faxes. Double-click Add Printer in the Printers folder to start
the Add Printer Wizard.
For Windows NT 4.0: Click Start, point to Settings, and then
select Printers. Double-click the Add Printers icon.
2. Click Next.
Chapter 2 About the Software
122
Advertisement
Table of Contents
