Table of Contents
Advertisement
Note:
If the Add Printer wizard prompts you to select either Keep existing
driver or Replace existing driver (recommended), be sure to
select the Replace existing driver radio button.
8. Follow the on-screen instructions to complete the setup.
When you print using Microsoft Network Shared printing in
the Windows XP/2000/Server 2003/NT environment, see
"Using the NET USE command" on page 86 for more details.
Using the NET USE command
If you are running Windows XP/2000/Server 2003/NT and using
NetBIOS to connect to the device, we recommend that you use the
NET USE command, as follows:
1. Check that the following services are installed.
Right-click the Network Neighborhood icon on the desktop
and select Properties. Click the Services tab and check that
Server or Workstation is listed.
2. If it is not installed, click Add.
3. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network
interface\Device name of network interface
Selecting the port
1. Click Start, point to Settings, and then select Printers.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set using
the NET USE command.
Chapter 1 Installing Components and Setting Up the Network Interface
86
Advertisement
Table of Contents
