Epson EpsonNet 10/100 Base Tx Int. 5e Manual page 100

❏ Run EpsonNet Config for Windows or Macintosh. Select
the device you want to configure from the list and then
click Launch Browser.
❏ Open your browser, and then type in the IP address of the
network interface directly. Do not run EpsonNet Config
for Windows or Macintosh.
http://IP address of network interface/
Example: http://192.168.100.201/
Note:
To check the IP address of the network interface, use EpsonNet
Config. For details, see "About EpsonNet Config for Windows" on
page 91 for Windows users, or "About EpsonNet Config for
Macintosh" on page 95 for Macintosh users.
Note on NetWare setting:
❏ From any NetWare client, log in to the target NetWare server
or NDS context with supervisor privileges.
❏ You cannot create a print server, print queue, or printer with
EpsonNet Config with Web Browser. You must create these
objects before using EpsonNet Config with Web Browser.
3. Click TCP/IP under Network on the Configuration menu to
display the TCP/IP setting screen.
Note:
If you want to configure a protocol other than TCP/IP, see
"Configuration - Network Screens" on page 108.
4. Select a method for acquiring the IP address. When you select
Auto, an IP address is automatically assigned to the network
interface via DHCP. If you want to set the IP address
manually, select Manual.
Chapter 2 About the Software 100