Table of Contents
Advertisement
From the server
To start EpsonNet WebManager, click Start, point to All
Programs (for Windows XP/Server 2003 users) or Programs (for
Windows 2000/NT 4.0 users), and then select EpsonNet
WebManager. Click EpsonNet WebManager.
Note for Windows XP Service Pack 2 users:
If EpsonNet WebManager is installed on the computer running
Windows XP Service Pack 2, make the following settings; otherwise the
client computers cannot access EpsonNet WebManager.
1. Click Start, point to Control Panel, and then select Security
Center. Click Windows Firewall.
2. Click the Exceptions tab, and then click the Add Port button.
3. Enter the name of the port in the Name text box, and 8090 in
the Port number text box, and then select the TCP radio
button.
Note:
If necessary, click the Change scope button, and then specify
the IP addresses of the client computers for which the port is
unblocked.
4. Click OK.
Chapter 2 About the Software
157
Advertisement
Table of Contents
