Table of Contents
Advertisement
❏ For Remote (LPR on IP) connection
IP Address: Enter the IP address of the network interface.
You can confirm the IP address on a status sheet.
❏ For Forward jobs to Queue connection
Queue Name: Enter the queue name that the network
interface uses in legacy queue-based print services (either
in Print Server mode or Remote Printer mode).
Queue User Name: Type a user name who has rights for
the above queue.
Password: Enter the password that the Queue User uses
to login to the server.
6. Select None for the Printer Driver.
7. Confirm the Printer Agent that you have just created.
In NetWare Administrator, double-click the NDPS Manager
object and click the Printer Agent List button. Check that the
status of the Printer Agent you have just created is "Idle."
Note:
If you have selected Remote (rprinter on IPX), configure the network
interface using EpsonNet Config, as described in the next section,
and then print a status sheet.
Go to the next section if you select Remote (rpinter on IPX).
Go to "Setting the printer on client workstations" on page 182 if
you select Remote (LPR on IP) or Forward jobs to Queue.
Configuring for NetWare using EpsonNet Config
Follow the steps below if you want to use the printer in IPX
network.
Note:
Be sure that the one of the following clients is installed on your computer:
Novell Client 32, Novell IntranetWare Client, or Novell Client.
Chapter 3 Tips for Administrator
181
Advertisement
Table of Contents
