Table of Contents
Advertisement
5. Press Esc to exit PCONSOLE, and log out from the server.
6. Log in to the server as an ADMIN. Be sure to log in with NDS
connection.
7. Start NWAdmin.
8. To create the Printer Object, click the container specified as
the Bindery context and select Create from the Object menu,
then Printer. Type the printer name and click Create.
9. To assign the print queue, double-click the Printer object icon
(created in step 8). The Printer dialog box appears.
10. Click Assignments and then click Add. From the print queue
list, select the queue (created in step 2) and click OK.
11. Click Configuration in the Printer dialog box, and select
Parallel from the Printer type pull-down menu.
12. Click Communication. The Parallel Communication dialog
box appears.
13. Select LPT1 for Port; check Polled for Interrupts; and check
Manual load (Remote from Print Server) for Connection
type, then click OK.
14. Click OK in the Printer dialog box.
15. To assign the printer, double-click the Print Server object icon
(created in step 4). The Print Server dialog box appears.
16. Click Assignments and then click Add. From the printer
object list, select the printer object (created in step 8) and click
OK.
17. In the Print Server dialog box, select the assigned printer from
the printer object list, and click the Printer Number button to
set the printer number from 0 to 15, then click OK.
Chapter 3 Tips for Administrator
170
Advertisement
Table of Contents
