Table of Contents
Advertisement
Chapter 1
Installing Components on Your Computer
About Installing Components on Your
Computer
Before configuring the print server and printing from the
computer, you need to install the necessary components (such as
TCP/IP, NetBEUI, etc.) and assign an IP address and subnet mask
for your computer, depending on the printing method you want
to use. See the section in this chapter appropriate for your
operating system.
Windows Me/98/95
For Windows Me/98/95, use the following procedure to install
the necessary components.
Note:
The Windows Me/98/95 CD-ROM may be required during the
installation.
When using TCP/IP or IPP for printing, you need to set the IP
address, the subnet mask, and the default gateway of the computer.
1. Click Start, point to Settings, and then select Control Panel.
Installing Components on Your Computer
1
1
1
1
1
1
1
1
1
1
1
1
15
Advertisement
Table of Contents
