Table of Contents
Advertisement
Status and Data lights
The network interface has two lights (Status and Data), which
indicate the current operating status of the network interface
when you first turn on the device, during normal operation, and
when errors occur. The status light has two colors (green and
orange). The data light is green.
The status lights indicate the network interface status, as follows:
Status light
Off
Green flash*
Orange status light and green data light
flashing alternately
Green
Green
Green
Orange
Orange
Orange
Orange flash
repeated once
Orange flash
repeated twice
Orange flash
repeated three
times
Orange flash
repeated four
times
Orange flash
repeated once
Data light
On
On*
On
Flashing
Off
On
Flashing
Off
On
On
On
On
Off
Network interface status
Resetting
Initializing
Firmware update mode
Ready (10M link)
Receiving packets (10M link)
No communication is
available (10M link).
Ready (100M link)
Receiving packets (100M link)
No communication is
available (100M link).
Address error
Bus error
TLB error
Other errors
File system error
Introduction
18
Advertisement
Table of Contents
