Table of Contents
Advertisement
Chapter 3
Tips for Administrator
Settings for NetWare Users
Introduction to NetWare Settings
This chapter explains how to configure the network interface for
NetWare. First, you need to set up the device in a NetWare
environment, and then configure the network interface using
EpsonNet Config.
Supported systems
❏ Server environment
NetWare 4.1/4.11/4.2 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare 5.0/5.1 (NDS, NDPS)
NetWare 6.0 (NDS, NDPS)
❏ Client environment
The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the
network interface.
The following Novell Client is supported.
❏ For Windows 98/95:
Novell Client 3.3 or later for Windows 98/95
❏ For Windows 2000/NT 4.0:
Novell Client 4.8 or later for Windows 2000/NT 4.0
Chapter 3 Tips for Administrator
164
Advertisement
Table of Contents
