Table of Contents
Advertisement
The port
Information
Finish button
Back button
Cancel button
The printer is now ready for peer-to-peer printing. To configure
the printer port, see "Configuring the printer port" on page 138.
Adding a port for a device assigned with a static IP address
Install the printer driver before adding a port for the device. See
the manual shipped with your device for instructions on how to
install the printer driver.
1. Click Start, point to Settings, and then select Printers.
2. Right-click the target device icon, and then select Properties.
3. Click the Details tab, and then click the Add Port button.
Select the Other radio button, and then select EpsonNet Print
Port. Click OK.
The following items are displayed:
- Port Name (automatically assigned according
to the selected port type)
- Printer Model
- Host Name or IP Address (automatically assigned
according to the selected port type)
- Protocol
Register the port information to the system and
close the Add EpsonNet Print Port Wizard.
Go back to the device list window.
Close the Add EpsonNet Print Port Wizard.
Chapter 2 About the Software
135
Advertisement
Table of Contents
