Names And Major Functions Of Components; Front - FUTABA MFS02 Instruction Manual

1. Names and Major Functions of Components

1-1 Front

⑥
⑦
⑧
① Display panel ･････････････････････・・・・・・・・Displays version information, IP address, input
② Control keys"→", "↑", "↓", "SET" ･･･・・・・･･･・"→" key: Changes the display contents when
③ Relay amplifier connector ････････････････Connected to a relay amplifier using a dedicated
④ Grounding terminal ･･･････････････････････Terminal for ground.
⑤ Voltage output terminal･･･････････････････Connected to the external measuring equipment
⑥
I/O cable connector
⑦ Wired LAN connector ･･････････････････････Connected to the PC using a LAN cable.
⑧ AC Adapter connector ･･･････････････････ Connected to the AC adapter
･････････････････････Inputs trigger signals and clear control signals,
voltage and flow velocity measurement values,
etc.
held down.
"↑", "↓" keys: Not used.
"SET" key: Used as manual trigger key.
junction cable. Two relay amplifiers can be
connected.
such as data logger and oscilloscope.
and outputs control signals.
4
⑤
①
②
③
④