Using The Cursor Functions; Waveform Display Settings; Enlarging Waveforms (Zoom) - FUTABA MFS02 Instruction Manual

※If you want to hide overlay, set the overlay count to 0.

6-3 Using the Cursor Functions

Time and voltage values can be displayed by placing the cursor on the waveforms being
measured. To do so, use "Cursor tool" on the toolbar.

6-4 Waveform Display Settings

6-4-1 Enlarging waveforms (zoom)

■ Using the "Zoom" button on the toolbar, select the part to enlarge.
Drag
※Mouse operation: Enclose the start point to the end point of the part to be enlarged, and release the mouse button.
Drag
23