Table of Contents
Advertisement
■ Open a template waveform of velocity waveforms
Select [Open a velocity waveform （HSp File）as a template waveform] from "File" in the menu bar.
Velocity waveforms are stored in the following folder along with other measured waveforms.
C：/Documents and
Select a file from the folder displayed with the date and press [Open].
The template waveform is displayed on the waveform being measured (in the lower frame window).
■ Color density of template waveforms
The density of the display color of the template waveform can be adjusted by selecting [View] →
[Display settings] →[Opacity of template waveform].
6-2 Overlaying Waveforms
■ The overlay count can be set by selecting [Display settings] from [View] in the menu bar.
Settings¥<User
name>¥My Documents¥MMS_DATA
The density can be set in 5% steps in the range of
0 to 100％. The higher the set value is, the denser
the display color becomes.
①
Overlay count
setting
②
Overlaid
waveform
display setting
①
②
③
③
Template-
waveform
opacity setting
22
Set in the range from 0 to 99.
Check: After overlay is performed the
specified number of times, the
overlaid-waveforms are entirely
erased.
Uncheck: Overlaid-waveforms are
erased in order from the old one.
A value can be set in steps of 5% from
0 to 100%. As the value is increased,
the template waveform is displayed
darker.
Advertisement
Table of Contents
