Checking The Operation; Checking The Communication Between Amplifier And Pc; Checking The I/O Signal - FUTABA MFS02 Instruction Manual

７．

Checking the Operation

This section explains how to check whether the system runs normally.

7-1 Checking the Communication between Amplifier and PC

The amplifier communicates with the PC through LAN connection. Whether the communication
is implemented normally can be checked with the color of the indicator at the upper right of the
operation window.
Communication normal status

7-2 Checking the I/O Signal

Check whether the connected I/O signal works correctly.
From the main menu, select [System] to run [I/O Test].
■ Checking the operation of input signal
Input a signal (trigger signal or clear control signal). If it is input normally, the signal name is
displayed in green as shown in the following figure.
When trigger signal (IN1) is input
■ Checking the operation of output signal
Check the "ON" check box shown on the right figure.
The signal name illuminates in green and an alarm
signal is forcibly output. Check whether the signal
operates normally at the output signal connection
destination.
Communication failure status
When clear control signal (IN2) is input
29