Table of Contents
Advertisement
9-2-2 Adjusting the light intensity of relay amplifier
1. Open the top cover of the relay amplifier and hold down the "MODE" (for over 3
seconds).
2. Here, press "MODE" five times to put the unit in light emission power switching
mode 【Att】. The indicator 【Att】 and the 【setting value】 flashes alternately.
3. Press "▲" or "▼" to adjust the value so that appropriate light intensity is obtained
(variable range: 1 to 100)
4. Press "MODE" twice to complete the setting.
5. Pressing "MODE" one more time displays the following characters and then brings
you back to the initial screen.
Initial screen
The 【hSP】indicator flashes
Setting value
35
Advertisement
Table of Contents
