Connections In System - FUTABA MFS02 Instruction Manual

2-4 Connections in the System
■ Connect the components in order of the numbers shown in the following figure.
Connect the power supply ⑥ after completing the connections ① to ⑤.
⑥
AC outlet
① Connect the sensor to the relay amplifier (see "9-1 How to Connect Sensor to the Relay
Amplifier" on P. 32.)
Open the upper lid of the relay amplifier, pull down the lock lever forward to unlock the amplifier.
Insert the sensor and push up the lock lever back to lock the amplifier.
Ensure that the sensor plug is inserted to the bottom.
② Connect the relay amplifier to the measurement amplifier.
Insert the relay amplifier plug to the measurement amplifier connector by aligning the red marks on
the plug and the connector.
Ensure that the sensor plug is inserted to the bottom.
④
⑤
②
7
Data logger, etc.
③
①