Function Description; Displaying Template Waveforms - FUTABA MFS02 Instruction Manual

６．Function Description
This section explains specific functions and advanced operations.

6-1 Displaying Template Waveforms

Flow velocity waveforms stored in the past can be displayed in the frame window.
Overlaying the template waveforms on the waveforms being measured makes it possible to visually
check "flow velocity transition at molding condition adjustment", "flow velocity variation during mass
production", and "flow velocity change when the molding conditions are changed".
■ Open a template waveform of the measured waveforms.
Select [Open a measured waveform (LSp File ) as a Template waveform] from "File" in the menu
bar.
The measured waveforms are stored in the following folder.
C：/Documents and
Select a file from the folder displayed with the date, and press "Open".
※Each template waveform file is automatically stored with a name consisting of a shot number, date and
time.
The template waveform is displayed on the waveform being measured (in the upper frame window).
※ If the template waveform is not displayed, check whether the "Show/Hide template waveform" button on
the toolbar is set to "Hide".
Settings¥<User Name>¥My Documents¥MMS_DATA
21