3.Basic Operation of Measurement Amplifier
This section describes the basic operation of amplifier "MFS02".
3-1 Turning Power ON/OFF
■Turning power ON
Turn on the power to the amplifier by referring to Section 2-6 "Connecting the Power Supply"
on Page 10.
■Turning power OFF
Disconnect the AC plug of the AC adapter from the AC outlet.
*The amplifier does not have a power switch.
3-2 Operating the Amplifier
3-2-1 Operating the key switches
■ Operate the keys on the amplifier as needed on the following cases.
●Checking the IP address of the amplifier or firmware version
●Starting measurement manually (Pressing the SET key starts the measurement)
①
②
③
④
① "→" key
Changes the display content when held
down
② "↑" key
Not used.
③ "↓" key
Not used.
④ "SET" key
Usable as the manual trigger
11