Safety Precautions - FUTABA MFS02 Instruction Manual

Safety Precautions

 Before Use
Before using the product, read this "Safety Precautions" and the instruction manual carefully.
After reading the manual, keep it in a safe place so that it can be used whenever needed.
When using the product, be sure to observe the following safety precautions.
Futaba Corporation assumes no liability for the injury caused by using the product contrary to these
precautions.
 This manual uses the following alert symbols for safe use of the product.
WARNING
CAUTION
 General Precautions
 When starting product operation, make sure in advance that the functions of the product are normally working
with normal performance.
 If the product fails, use adequate safety measures to prevent various types of damage.
 Note that we cannot guarantee the functionality and performance for use of the product not conforming to the
specifications or any remodeled product.
 When using the product in combination with other equipment, evaluate it thoroughly because the functionality
and performance may not be satisfactory depending on the use conditions and environment.
 Precautions
WARNING
WARNING
WARNING
WARNING
CAUTION
Failure to observe the instructions with this symbol could result in death
or serious personal injury.
Failure to observe the instructions with this symbol could result in injury
or only damage to property.
When installing the product or connecting cables, be sure to disconnect the
power cable from the outlet in advance.
It could result in electric shock or malfunction.
Do not use a broken cable or a cable with a flaw in the covering.
It could result in fire, electric shock, or device damage or failure.
Use the power to the AC adaptor within the range (100 to 240 V) stipulated in the
specifications. Using power outside the range could result in fire or device
damage or failure.
Use the AC adaptor that comes with the product.
Using any other AC adaptor could result in device damage or failure.
Keep the sensor, measurement amplifier and relay amplifier away from water.
It could result in electric shock or device damage.
(Be sure to read before use)
0