Lock Your Access Point; Post Installation - Extreme Networks AP3000 Installation Manual

Lock Your Access Point

Lock Your Access Point
Before You Begin
You will need the following items:
•
A 3 mm diameter security cable
•
A lock to secure the cable
About This Task
You can use the Kensington security slot to secure your access point. The security
feature prevents someone from taking the AP.
Procedure
1. Insert the safety cable through the security cable hole on the metal base of the
access point.
2. Insert a lock through the looped ends of the cable and lock it in place.

Post Installation

After you have installed the access point, you should do the following tasks:
•
Confirm that the LED is white. A white LED indicates that your AP has powered up
and registered with the controller. An amber light indicates a technical issue that
requires a resolution. See
You can see a list of registered APs and the status of each AP in the controller.
•
Wireless APs are added to your network with the default settings. After the AP
registers with a controller, you should configure the AP to meet your needs and
assign it to one or more Virtual Network Services (VNS). You can also modify the
settings for each radio on the AP.
36 ExtremeWireless™AP3000 Access Point Installation Guide
LED Status on page 13 for an explanation of the LED states.
Access Point Installation