Sanyo VCC-HD5600P Series Manual page 92

1
In [SEQUENCE], select "1".
2
Configure the monitoring sequence
STEP: Moves in the numerical order of preset positions.
RANDOM: Moves in a random manner among the preset positions in the group.
3
Set a uniform pause period at each preset position
3SEC, 4SEC, 5SEC, 6SEC, 7SEC, 8SEC, 9SEC, 10SEC, 15SEC, 20SEC, 30SEC, 45SEC, 1MIN
PRESET (Applies the pause period that is set for each preset position.)
4
Select a movement speed and click
1 (slow) to 15 (quick)
Now the settings for the sequence 1 have been stored.
You can follow the same steps to configure for the sequences 2 to 4.
Running the Stored Sequence Operation
In [SEQUENCE], select a stored number and click
Four patterns of auto panning operation are available as shown below.
1
Click PTZ to view the PTZ controller.
2
Select "1" for [AUTO PAN].
3
Use the controller to specify the start position while monitoring live video displayed on
the monitor, and click
The start point has been specified.
.
SET
RUN
to close the menu screen and run a specified operation.
.
START
Working with Administrator Configuration Screens 46/77