Sanyo VCC-HD5600P Series Manual page 91

(Group 1)
4
Perform the same steps to configure preset positions for "PRESET NUMBER.2" onwards.
You can save up to 256 preset positions.
In [GROUP NUMBER], select a group number for batch assignment, and then click
The specified group number is assigned to up to 20 preset positions in the same page.
You can specify up to 20 preset positions in a page.
If you want to switch to another page, specify the range of preset position numbers in [PRESET NUMBER
SELECT].
1 - 20, 21 - 40, ... 241 - 255 (13 pages in total)
DEFAULT
Click , and then
Every setting such as the orientation of the camera lens will be returned to the factory default setting.
SET
Click in [AUTO MODE SETTINGS] on the PAN/TILT screen to display the AUTO MODE SETTINGS screen.
On this screen, you can configure four automatic mode operations as follows:
A Moving in a sequential manner among multiple preset positions (SEQUENCE).
B
Reciprocating between two preset positions specified (AUTO PAN).
C
Repeating a registered continuous operation pattern (TOUR).
D Automatically returning to a monitoring condition specified (AUTO RETURN).
The camera moves on to the next preset position one after another among those saved in the same sequence
group.
Four patterns of sequence operation are available as shown below.
To use this function, on the PRESET POSITION SETTINGS screen, register preset positions which
you want to monitor in sequence in the same groupe.
(Group 2)
YES
in the confirmation dialog box.
SET
Working with Administrator Configuration Screens 45/77
.